Menu
neat cutting fluids
For processes that due to their severity require a fluid with superior lubricity properties.
They contain different types and concentrations of anti-wear and extreme pressure additives that promote the formation of tribo-chemical films of lower resistance to flow, preventing tearing of the piece and achieving better surface finishes and a longer tool life.
They can be specifically designed for both ferrous and non-ferrous alloy operations.
MAIN PRODUCTS
Tribos Neat A-1 ESP
Neat cutting oil for ferrous alloys, superior EP properties at the best cost.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat A-6
Neat cutting oil ferrous alloys, superior EP properties. With passivators to avoid staining.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat AL-15
Neat cutting oil EP for ferrous alloys.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat AL 50-C
Neat cutting oil EP for ferrous alloys, including stainless steels.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat MB-25
Neat cutting oil EP for non-ferrous alloys.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat TRP-14
Neat cutting oil for non-ferrous alloys. Low viscosity, for trepanning.
Presentations: Drum 200 Lt. | Container 1000 Lt.
neat cutting fluids
Our direct shear oils are used in various processes such as carving, broaching or deep threading, which due to their severity require a fluid with superior lubricity properties that work in a boundary lubrication regime.
They contain various types and concentrations of anti-wear and extreme pressure additives that promote the formation of tribo-chemical films of lower resistance that prevent tearing of the piece, thus achieving better surface finishes and a longer tool life.
They can be specifically designed for both ferrous and non-ferrous alloy operations.
They contain various types and concentrations of anti-wear and extreme pressure additives that promote the formation of tribo-chemical films of lower resistance that prevent tearing of the piece, thus achieving better surface finishes and a longer tool life.
They can be specifically designed for both ferrous and non-ferrous alloy operations.
main products
Tribos Neat A-1 ESP
Direct cutting oil for ferrous alloys, superior EP properties at the best cost.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat A-6
Direct cutting oil for ferrous alloys, superior EP properties. With passivators to avoid staining.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat AL-15
EP direct cutting oil for ferrous alloys.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat AL 50-C
EP direct cutting oil for ferrous alloys, including stainless steels.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat MB-25
EP direct cutting oil for non-ferrous alloys.
Presentations: Drum 200 Lt. | Container 1000 Lt.
Tribos Neat TRP-14
Direct cutting oil for non-ferrous alloys. Low viscosity, for trepanning.
Presentations: Drum 200 Lt. | Container 1000 Lt.